This section contains step-by-step instructions for building different types of RVA Mesh nodes.
Whether you’re setting up your first USB-powered indoor device or deploying a solar repeater in the field, these guides will walk you through the process.
| Build Type | Description | Link |
|---|---|---|
| Yeti Rak 1 | first node yeti build | View Guide |
/nodes/guides/
farm-deploy, solar-pico)# Solar Node Build
**Type:** Solar-Powered Outdoor Node
**Last Updated:** June 2025
---
## Hardware
- [Heltec V3](/nodes/hardware/boards/heltec-v3)
- [8W Orayafid Solar Panel](/nodes/hardware/solar/orayafid-8w)
- [RAK Solar Cable Pack](/nodes/hardware/solar/rak-cable-pack)
- [Zulkit Enclosure](/nodes/hardware/enclosures/zulkit-ip65)
---
## Assembly
1. Mount the board inside the enclosure
2. Connect solar panel to charge controller
3. Wire charge controller to protected battery input
4. Use breathable plug for pressure equalization
5. Test indoors before outdoor deployment
---
## Notes
- Ensure the panel faces true south
- Elevate the enclosure for signal clarity
- Label the outside with node name and channel
---
[Back to Build Guides](/nodes/guides)